#Microsoft remote desktop 10 setup windows 10#
#Microsoft remote desktop 10 setup Pc#
#Microsoft remote desktop 10 setup windows#

Note that this only requires to be done if your public IP address keeps changing. If that is the case, you need to contact your ISP and ask for a static IP address, which may cause a little extra as these IP addresses are primarily reserved for businesses.ДЄlternatively, you can also configure the Dynamic Domain Name System (DDNS) on your router to assign your router a name it will track regardless of the change in the public IP address. But often ISPs tend to provide dynamic public IP addresses which change from time to time. Your public IP address will then be highlighted, as shown in the image above. You can check your public IP address via command line, or simply type in вЂњWhatвЂ™s my IP addressвЂќ on GoogleвЂ™s website to find out. This IP address is provided by your Internet Service Provider (ISP). The next part of the process is determining your networkвЂ™s public IP address.

#Microsoft remote desktop 10 setup windows#

Make sure that you are still connected to the internet to ensure that all configurations are done correctly.ДЄs an alternative, if you are more comfortable with the command line, you can also set a static IP address and DNS server using the command line in Windows 10. You have now successfully set up a static IP address on your computer. Note: You can set the DNS server(s) to GoogleвЂ™s addresses which are 8.8.8.8 and 8.8.4.4. Once done, click OK on all open windows to close them. In the next Properties window, select the вЂњUse the following IP addressвЂќ radio button and then fill in the fields below from the information obtained from the Command Prompt earlier which includes the IP address, subnet mask, default gateway, and DNS server(s). On the Properties window, click Internet Protocol Versions 4 (TCP/IPv4) and then click Properties. From there, right-click the network adapter connected to the router and click Properties from the context menu.

#Microsoft remote desktop 10 setup windows 10#

To configure a static IP address on a Windows 10 machine, type in ncpa.cpl in Run to open the Network Connections window. We will be assigning the same IP address manually to make it static.

#Microsoft remote desktop 10 setup Pc#

In the image above, the IP of our target PC is 192.168.100.245. In our case, we are using Wi-Fi to connect to the router: You need to look for the вЂњIPv4 addressвЂќ under the network adapter that is connected to the router, it may be wired or wireless. This command will display all the IP configurations of all network ports on the PC, including virtual ones. To identify the current allotted IP address, open Command Prompt and type in ipconfig /all. Before we do that, let us see what the current IP address of the machine is so that we allocate the same static IP address to avoid an IP address conflict with any of the other devices on the network. Therefore, we must set a static IP address for this right now. For that, we need the IP address of this machine to be static, i.e.

However, in a further step down the article, we will require to forward a port onto the IP address of this target PC. This protocol automatically allots vacant IP addresses to all connected devices to avoid any IP conflict. Set static IP addressД«y default, most routers are set to Dynamic Host Configuration Protocol (DHCP).

Let us now proceed with the other configuration steps. Remote Desktop connection is now successfully enabled on your PC. Open the Remote Desktop setting in the Settings app (Run -> ms-settings:remotedesktop) and toggle the slider under Enable Remote Desktop. The same can be achieved using the Settings application in Windows 10. Enable remote desktop connection through Settings app